Cleanboat
How it works
You drive the boat onto a floating cover fixed at your berth. The cover closes tightly around the hull and the water in between becomes low in oxygen – no antifouling paint.
-
01
Fit the cover
The cover is placed in the water and secured at the berth – Y-boom, piles, pier or buoy. It stays there all season.
-
02
Drive the boat on
As soon as the bow is on the cover, the boat steadies and stops – no drifting, no bumping the pier.
-
03
Protect the hull
The buoyant layer inside the cover makes it close tightly around the hull. Without light, nutrients and oxygen, fouling cannot take hold.
Technical explanation
Fouling needs light, nutrients and oxygen. The cover removes all three.
Principle sketch – not to scale · hover over or tap a point to highlight it
- 1The boatMoored as usual.
- 2The waterlineThe cover floats at the surface – it does not rest on the seabed.
- 3The buoyant layerSits inside the cover, across its whole surface. It provides buoyancy, so the cover closes tightly around the hull.
- 4The coverForms a pocket under the hull while the boat is moored.
- 5The water between cover and hullGets little light, nutrients and oxygen – what fouling needs.
- 6The hullStays clean without antifouling.
Without a cover, sunlight gets in – perfect for algae.
The cover shuts out the light, so algae growth is checked from the start.
Open water gives free access to nutrients.
The enclosed space under the boat limits the supply.
Plenty of oxygen suits barnacles and algae.
Low-oxygen water makes it hard for organisms to survive.
See the product up close
This is the cover.
A heavy-duty cover sized to your boat’s length that stays out all season. When the boat comes out, the cover comes out and is cleaned.
- 1ID tagAll new Cover models have an ID tag at the front.
- 2Eyelets along the edgeUsed when the cover is secured at the berth.
- 3Cleanboat brandingVisible along the edge when the boat is on the cover.
- Construction
- Three layers with buoyancy (Cover)
- Colours
- Blue or black
- Size
- By boat length, 3–10 m
Fits most berths
The cover works with Y-booms, piles, stern buoys and alongside berths, for both RIBs and motorboats in most harbours. At exposed berths it dampens the waves, so the boat lies more steadily.
Find the right cover




